Stainless Steel Handmade Sink Manufacturers Share The Problem Of Water Pipe Blockage
Today, Stainless Steel Handmade Sink Manufacturers share the problem of water pipe blockage.
The clogging of the water pipes in the kitchen sink is a problem that is often encountered. After the pipeline is blocked, it is necessary to immediately clear it, otherwise it will cause sewage overflow.
The down pipe is blocked. Generally, the pipe is blocked, that is, the position of the V-shaped trap.
Nowadays, the water pipe is generally the down pipe with the screw knob cover. This cleaning is relatively simple, and the pipe can be directly removed and cleaned. Before removing the pipe, it is best to place a basin underneath to pick up the waste water. So as not to dirty the ground. After the tube is removed, rinse it off with water. Then assemble it and pick it up, it will take a dozen minutes. If it is not the kind of screw cap, it can only be pressed by one hook and two hooks. Anyway, it is an exhaustive method to clear it.
Therefore, after the basket residue is usually full, it will be dumped in time. In order to avoid the residue remaining in the water head for a long time, the black water collection inside the water purifier is not cleaned, and it is easy to emit odor.
There is no difference between the two types of water. Seeing that you are used to using that, each has its own advantages and disadvantages. But don’t feel that the water dispenser has a basket, or if you install a garbage disposer, you are not afraid of the pipeline being blocked. Sometimes the condensation of oil can block you from doubting your life.
A good launching water must not only ensure that there is no water leakage, the pipeline is strong and durable, but also has a trap. The pipe is preferably a 50-gauge wire hose, which is almost the same. It is best to have multiple interfaces, because nowadays dishwashers, water purifiers are more and more people, these need to be connected to the drain. It is not too convenient to connect directly to the drain pipe of the sink. Sometimes the mouth is still not enough? Then add the three links, the four links. There are always solutions to the problem.
The installation of the sink requires glue to ensure the stability and tightness of the sink. However, the general glass glue, after a long period of use, is easy to develop black mold. Because kitchen sinks often need to be in contact with water, the humid environment is an important factor in the moldiness of glass glue.
There is no good way to deal with the mildew on the side of the sink. The general cleaning method can only maintain the brilliant effect for a short time. For example, use some toilet spirit, 48 disinfectant, Mr. Wei Meng, baking soda, toothpaste and so on. These cleaning supplies can only last for a while.
The better way is to cut off the moldy glue on the side of the sink and replace it with the mold-proof glue. However, it should be noted that some of the current mold-proof glues on the market are not very effective in terms of adhesion. Therefore, if you want to change the glue, you need to fully consider the stability of the sink.
If the problem is analyzed from the installation method of the sink, the installation of the stage or the Taichung basin is two installation methods that are relatively mild and black.
Because the glued part of the sink is directly exposed on the surface, when the kitchen is cleaned, some oil and water will exist in the gap at the side of the sink. This also accelerates the mildew on the side of the sink.
The under counter basin, because it is mounted under the countertop, is not so easy to make black hair mold. Even if it is black mold, it is not easy to be noticed. And it’s easier to clean. Take a brush directly and rush with water. It was washed away directly in the sink.
information about Stainless Steel Handmade Sink Manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/