Stainless Steel Handmade Sink Manufacturers Share The Advantages Of Handmade Sinks
Today, Stainless Steel Handmade Sink Manufacturers is here to share knowledge of the hydraulic sink.
Hand-made sinks, as the name implies, are all hand-made. Generally, the thickness is 1.2-1.5mm. This thickness of stainless steel sheet cannot be stretched on the mold, and it will break once punched. At present, there is no process for drawing a stainless steel plate exceeding 0.8 mm, and therefore, the thickness of a conventional drawing tank cannot be more than 0.8 mm. Secondly, the hand-made sinks are hand-built and laser-welded. Therefore, the requirements for the plates and equipment are high, and generally more than 304 stainless steel plates are used, which increases the cost of the plates. The ordinary stretching tank is stamped by a die, the sheet is thin, and the drawing shape is also easier. The low-grade stainless steel sheet such as 201 is generally used in the market.
For the surface treatment of the sink, the current mainstream on the market is fine wire drawing treatment, which can well highlight the texture of the sink and have a luxurious visual sense. The surface treatment of the stretching trough is usually treated with pickling of pearl sand. The cost is very low and the process is simple. Although many manufacturers now use the drawing process on the stretching pot, they are rough and coarsely brushed. The grade is not high, and due to the low grade of the sheet, it often appears rust spots after a period of use. Therefore, if you want a more textured and durable sink, consider a manual sink.
information about Stainless Steel Handmade Sink Manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/