Just login or join us in 1 min. and you will be able to follow, pin, organize, share, comment all images you like.

Spotlight Supplier From China – Led Spotlight: Key Technology
In recent years, spotlights have been popular in popularity and for good reason. They are modern, easy to replace and, most importantly, versatile.

  The key to the versatility of a spotlight is its color and beam angle. The wider beam angle and warmer colors are ideal for ambient lighting where light is scattered over a wider area. Cooler colors and narrower angles are ideal for highlighting specific fixtures or room areas, which is especially useful in commercial or public settings.

  What is an LED spotlight?

  Since its introduction, LED technology has rapidly penetrated into every stage of the lighting industry, and almost all LED replacements for bulb design are now widely available. Spotlights are no exception.

  In short, LED spotlights look and work the same way as existing halogen or incandescent spotlights, but use modern LED technology as the primary source. This brings a range of benefits, from reduced operating and replacement costs to withered energy bills and a beneficial feeling for contributing to a cleaner planet.

  Why should I switch to the LED spotlight?

  For many people, the main obstacle to switching to LED bulbs is the lack of information and the erroneous impression that LEDs are more expensive and ultimately less advanced than the prior art.

  This may have been true a few years ago, but today LED bulbs have successfully mimicked the warmth and brightness of old filament bulbs while reducing lighting costs by 90%.

  Although the initial cost is relatively high, LED spotlights can recover costs within a year, sometimes even within six months, so when you think LED bulbs have a design life of up to 20 years, the potential savings associated with them may be astronomical. . .

  As a general rule, LEDs use approximately 10% of the energy of an incandescent bulb, as indicated by its equivalent wattage. The figure below compares the wattage of a Crompton 5W LED GU10 luminaire with a filament bulb that produces the same light quality.

  LED bulbs can also last 15 to 50 times longer, which means you don’t need to replace them. Keep in mind that LEDs are still improving and these numbers will get better over time.

  What is color temperature and why is it important?

  The warmth of an incandescent bulb depends entirely on its technology. Incandescent bulbs – as the name suggests – work by forcing heat through a metal (usually tungsten) filament and then heating and illuminating. This produces light while also giving the bulb a distinct warm color. Although halogen bulbs work differently, they also have a similar warm glow.

  However, one of the many advantages of LEDs is that they can reproduce a variety of colors, from the warm white of traditional bulbs to brighter, whiter, and more modern equivalents.

  In order to successfully imitate the illumination of incandescent filament bulbs, it is best to choose a white bulb with a temperature between 2700k and 3000k. This is especially effective in a family, traditional environment where comfort is key. The temperature of the “cooler” looks whiter and then becomes bluer as you get higher and higher. Therefore, cool white and daylight bulbs don’t look like filament bulbs, but they are perfect for public spaces or workplaces, and of course they look more modern.

  Can I dim my LED spotlight lens?

  of course! Dimming a light-emitting diode is as simple as dimming any incandescent or halogen bulb. However, due to digital technology, LEDs require different environments to properly dim. For a complete explanation of this, see how to calculate the load level to which dimmer switch to use, see our extensive dimming guide.

  I want to switch to an LED bulb: Do I need to rewire?

  So, you already understand (sorry) and decided to go to the LED spotlight lens. Congratulations!

  So what happened now? Do you need to reroute or hire an electrician?

  It all depends on what kind of spotlight you have now and what you want to replace them.

  The GU10 bulb is a power supply voltage spotlight, so it is easier to replace; just remove the old bulb and replace it with an equivalent LED. Comparing the equivalent wattage or lumens of the two bulbs will ensure that the newly installed LEDs are identical in brightness and quality to the old bulbs.

  In addition, there is really nothing to worry about when replacing the GU10 bulb. Simply remove the old ones, screw the LEDs into the fittings, lock them in place, and then step back and marvel at your lighting bills starting to plummet.

  The MR16 bulb is not that simple. As a low-voltage bulb, this requires the transformer to reduce the supply voltage to a more comfortable 12V that the bulb can handle. If you want to replace the halogen MR16 spotlight with an equivalent light-emitting diode, you may also need to purchase a modern electronic light-emitting diode driver to handle low-watt LEDs.

  Old-fashioned magnetic transformers work well with LED bulbs, but transformers are similar to dimming systems because they usually have a predetermined wattage range and the bulb is expected to be within this range. Replacing the MR16 bulb with an equivalent LED will eliminate your cumulative wattage (which is a good thing), but it also means you may fall below the minimum wattage requirement for the transformer. This can cause the lamp to flicker, strobe, or completely fail the circuit.

  As mentioned above, purchasing an electronic driver is the best way to avoid this. However, this in itself raises a unique set of questions, from ensuring that the drive itself is ready (some are designed before the LED era, so playing the ball is not good), to make sure it provides the correct current and voltage (in In the case of the light-emitting diode Mr16s, it is usually 12v DC).

  Ultimately, if extra effort is required, we usually recommend that you simply restore the circuit to the supply voltage and use the GU10s instead. This completely eliminates the need for transformers and eliminates any potential compatibility issues. Think of it as removing the middleman and giving yourself a nice, clean circuit with no unnecessary fixes in the background. However, if you find yourself in the MR16s is the only option, a complete LED driver can be found here.

  The emergence of LEDs brings some new benefits. In fact, you can still be immersed in the sexy aesthetics of the spotlight, while also cutting the lighting costs by 90%, which sounds incredible, but I can assure you that this is not the case.

  Linsheng Electrical Company is a Spotlight Supplier from China . It explains the technical advantages of LED spotlights above. I hope to inspire you. I want to know more about communication. You can leave a message on our official website. We will provide professional and high-quality answers. Solve for you.

  
https://www.linsheng.com

Spotlight Supplier From China – Led Spotlight: Key Technology
In recent years, spotlights  ...
avatar

Related Pins

Emergency Light Should Be 3 Reasons For LED
According to safety regulations, if the route is not ...
Emergency Light Should Be 3 Reasons For LED According to safety regulations, if the route is not obvious, your commercial building must have an emergency exit light indicating the emergency exit door and emergency exit access. But properly installing ...
Kitchen Faucets Manufacturers Share The Repair Steps Of The Old Faucet

Now with the development ...
Kitchen Faucets Manufacturers Share The Repair Steps Of The Old Faucet Now with the development of science and technology and the improvement of people’s living standards, more and more new types of water equipment have entered thousands of hou ...
Handmade Sink Manufacturers Introduce Tips For Cleaning The Sink


Today, handmade sink manufact ...
Handmade Sink Manufacturers Introduce Tips For Cleaning The Sink Today, handmade sink manufacturers will introduce the cleaning method of the sink. 1. The retained water will cause mineral deposits to occur. In this case, a low concentration of vin ...
Handmade Sink Manufacturers Introduce 8 Cleaning Features


Today, handmade sink manufacturers w ...
Handmade Sink Manufacturers Introduce 8 Cleaning Features Today, handmade sink manufacturers will introduce the cleaning method of the sink. 1. The retained water will cause mineral deposits to occur. In this case, a low concentration of vinegar so ...
Linsheng   – Portable Air Compressor Purchase Category
LinSheng   explained that air compr ...
Linsheng – Portable Air Compressor Purchase Category LinSheng explained that air compressors convert electricity (usually electricity or gas) into compressed air drift. Air can be used in multiple packages, usually defined for domestic, indu ...
Stainless Steel Faucets Manufacturers Share 3 Handle Removal Solutions


Below the .stainless st ...
Stainless Steel Faucets Manufacturers Share 3 Handle Removal Solutions Below the .stainless steel faucets manufacturer will bring you the faucet handle removal method for your reference: Faucet handle removal method 1. First close the total water v ...
Handmade Sink Manufacturers Share The Sink With Tolerance


handmade sink manufacturers share th ...
Handmade Sink Manufacturers Share The Sink With Tolerance handmade sink manufacturers share the choice of double sink: 1. The raw material stainless steel makes the water tank resistant, and can prevent the damage of various kinds of porcelain uten ...
Linsheng   – Intelligent Emergency Lighting: What Basic Technology Applications?
 Emergen ...
Linsheng – Intelligent Emergency Lighting: What Basic Technology Applications?  Emergency lighting systems for commercial buildings often do not receive the attention they deserve. Most people may pass it every day regardless of their importa ...
Handmade Sink Manufacturers Share The Anti-Noise Effect Of The Sink

Today, handmade sink manufa ...
Handmade Sink Manufacturers Share The Anti-Noise Effect Of The Sink Today, handmade sink manufacturers come to share the bottom of the tank. 1. The treatment method at the bottom of the sink. The bottom of the domestic water tank generally has a coa ...
Handmade Sink Manufacturers Share Cabinet Size Design

In the design of the cabinet, not only mu ...
Handmade Sink Manufacturers Share Cabinet Size Design In the design of the cabinet, not only must be combined with the size of the kitchen to design, but also combined with the height of the owner to design, in order to design a cabinet of moderate h ...
Stainless Steel Handmade Sink Manufacturers Share Sink Maintenance Strategy

Many families may f ...
Stainless Steel Handmade Sink Manufacturers Share Sink Maintenance Strategy Many families may face the phenomenon of floating rust in the sink. Many people do not know why the sink will float rust or what to do if the sink floats rust. The sink is us ...
Spotlight Company From China – The Significance Of The Spotlight

In this era of economic  ...
Spotlight Company From China – The Significance Of The Spotlight In this era of economic development, various cultural and recreational activities have become an indispensable part of our lives. I believe that everyone has the experience of wat ...
Stainless Steel Handmade Sink Manufacturers Share How To Install Correctly

Many households use  ...
Stainless Steel Handmade Sink Manufacturers Share How To Install Correctly Many households use stainless steel sinks, and stainless steel sinks have already entered thousands of households. So, how do we decorate the sinks we just bought? Let’s ...
Stainless Steel Handmade Sink Manufacturers Share The Standard For Handmade Sinks

The sink is n ...
Stainless Steel Handmade Sink Manufacturers Share The Standard For Handmade Sinks The sink is no stranger to us. They are installed after the kitchen is renovated. It also plays an important role in the kitchen. When we bought the sink, we found that ...
Stainless Steel Handmade Sink Manufacturers Share The Advantages Of Handmade Sinks

Today, Stain ...
Stainless Steel Handmade Sink Manufacturers Share The Advantages Of Handmade Sinks Today, Stainless Steel Handmade Sink Manufacturers is here to share knowledge of the hydraulic sink. Hand-made sinks, as the name implies, are all hand-made. General ...
Emergency Lighting – How To Stay Safe From Accidents?
It is too easy to treat emergency li ...
Emergency Lighting – How To Stay Safe From Accidents? It is too easy to treat emergency lighting as a scale frame, but if your lighting system is going to pass the collection, you need to make some real decisions. Emergency Light Manufacturer | ...
Stainless Steel Handmade Sink Manufacturers Introduces The Maintenance Process For The Sink
Toda ...
Stainless Steel Handmade Sink Manufacturers Introduces The Maintenance Process For The Sink Today, Stainless Steel Handmade Sink Manufacturers introduces 10 maintenance details of the sink 1. Clean immediately after use, dry and store, try not to let ...
Stainless Steel Handmade Sink Manufacturers Share The Problem Of Water Pipe Blockage
Today, Stai ...
Stainless Steel Handmade Sink Manufacturers Share The Problem Of Water Pipe Blockage Today, Stainless Steel Handmade Sink Manufacturers share the problem of water pipe blockage. The clogging of the water pipes in the kitchen sink is a problem that i ...
Requirements For The Renovation Of Stainless Steel Laundry Cabinet

Reasonable placement of Stai ...
Requirements For The Renovation Of Stainless Steel Laundry Cabinet Reasonable placement of Stainless Steel Laundry Cabinet : avoid no windows, lighting should not be too much, lighting fittings should not be exposed, dazzling colors should not be sel ...
Stainless Steel Laundry Cabinet Intelligently Solves The Problem Of Moisture

Generally, we choo ...
Stainless Steel Laundry Cabinet Intelligently Solves The Problem Of Moisture Generally, we choose to put the laundry cabinet in the laundry room, balcony, bathroom, etc. If the ventilation effect of the surrounding environment is not good, the laundr ...

Top