Kitchen Faucets Manufacturers Share The Repair Steps Of The Old Faucet
Now with the development of science and technology and the improvement of people’s living standards, more and more new types of water equipment have entered thousands of households, but many people still use old-fashioned faucets that have been installed for many years and are still very useful. The probability of such a faucet having a problem is very high, such as the risk of water leakage. In fact, the old-fashioned faucet leaks are still very well repaired. The following kitchen faucets manufacturers introduce how old-fashioned faucets leak.
1. Old-fashioned faucet drip repair tools. Of course, some tools are needed to disassemble the faucet. Generally, we only need to prepare: a cross-blade screwdriver, a wrench or pliers, a piece of worn bicycle inner tube and scissors.
2. First close the faucet angle valve or the water source of the whole house, then open the faucet to put the water out of the pipe and hurry, then use a screwdriver to put the plastic baffle on the top of the faucet.
3. Use a Phillips screwdriver to unscrew the top of the faucet handle and then remove the entire faucet handle.
4. After taking the handle of the faucet, reveal a part of the faucet.
5. Then use a pliers or a wrench to turn the spool assembly counterclockwise with a wrench.
6. Carefully disassemble the valve core assembly, taking care not to damage the components and check for damage. If it is not damaged, it is because the parts are loose and cannot be sealed tightly. Now we can see its construction. The way we take it is to use the old inner tube as a ring leather pad and add it to the plastic sealing ring (red ring) and the valve core to increase the tightness of the contact.
7. Apply water (or honey for a long time) on the inside of the valve plastic seal (red ring), print the watermark on the inner tube segment, and cut a ring leather pad along the mark. I cut it very irregularly. If you can buy a finished leather mat of the right size, you can save it. General hardware stores may buy it.
8. Assembled in the original order, now a black ring pad is inside, and the assembled valve core is reinstalled. The tightness is increased. The valve core is assembled first, then the combined valve is assembled. The core is mounted on the main body of the faucet, and then the faucet is installed.
information about kitchen faucets manufacturers : https://www.afastainlesskb.com/product/stainless-steel-faucet/kitchen-faucet/