Handmade Sink Manufacturers Share What Is The Sink Welding Method
Everyone knows the stainless steel sink, but its production process is not very thorough. Today, handmade sink manufacturers will tell you what is the welding method of stainless steel sink process:
The welding process is made by CNC wave-resistance welding, and the quality is all passed. There are two ways to do it:
1. The first type is the surrounding welding of the pot and the panel welded together, also called the seam welding (bottom welding). The advantage is that the appearance is beautiful, after the strict treatment, the welding mouth is not easy to be found, and the surface of the water tank is straight and smooth, and the disadvantage is that some consumers doubt the firmness. In fact, the current welding technology mainly has sub-arc welding and the most advanced numerical control resistance welding, the quality has passed. The disadvantage of this type of welding is that it is too consuming material and it is necessary to punch two steel plates.
2. The other is the two single basin butt welding, also called butt welding. The advantage is that the basin and the panel are integrally formed by stretching, and the utility model has the advantages of being durable and durable, and the disadvantage is that the welding trace is easy to be seen, and the flatness is slightly poor. In fact, some so-called one-time forming double-slot water tanks are not one piece of material stamped, but are welded together by two single pots. You can pay attention to it when you buy them. The solder joints are in the middle of the two sinks. You can see from the reverse side. Out, a piece of plate is punched into two sinks, and there is currently no technology in the world. The hardest thing to do with the soldering basin is to ensure that the surface of the basin is flat. If you can guarantee then it is really the best way. Because it is the same material as the overall stretch, it can also solve the stretching problem of joint stretching.
The welding quality of the welding trough is one of the most critical factors affecting the life of the trough. Welding is good to prevent rust and desoldering. The welding should be smooth, smooth, tight, free of welds, rust-free, and burr-free.
Any double basin with a depth of more than 18cm is welded. Because the double basin is stretched more than 18cm at the same time (the depth of the tank, not the total height of the groove plus the groove), it is the ultimate depth of the processing.
information about handmade sink manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/