Handmade Sink Manufacturers Share The Precautions For Installing The Sink
Below, handmade sink manufacturers to remind the following problems in the installation of the sink need to pay attention to everyone, pay attention to the following problems can better avoid the use of bad phenomena.
1. the sink is installed in the kitchen renovation
The installation of the sink should be left at the end of the kitchen renovation. The installation of the sink is not a big project. Prepare the sink for the prepared items and install them. After the sink is ready, install the installer directly.
2. The water pipe must be drained during installation.
Be sure to drain the water from the water pipe before installing the water tank. If the water is not drained during installation, it will cause water leakage and rust in the water tank in the future.
3. the faucet must be firm when installed
This point is very important for everyone to pay attention to, when installing the sink must pay attention to the firmness of the joint, but also pay attention to the location of the hot and cold water pipe, do not make a mistake. If the installation is not strong, there will be gaps near the sink, resulting in water leakage.
4. need to be cleaned after installation
After the installation is completed, the sink must be cleaned and the debris during installation should be thoroughly rinsed. In addition, the stains that are easy to see in the daily sink can be treated like this. The sink should be cleaned with warm water, washing liquid and soft cloth after use. The usual stains can be removed immediately; the usual stains such as garbage and cream are slightly polluted and should not be used. Use a strong detergent to clean; foods that easily contaminate the sink, such as tea, coffee, juice, etc., should be washed immediately with water or detergent to prevent alkaline deposits from remaining in the sink.
information about handmade sink manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/