Handmade Sink Manufacturers Share The Anti-Noise Effect Of The Sink
Today, handmade sink manufacturers come to share the bottom of the tank.
1. The treatment method at the bottom of the sink.
The bottom of the domestic water tank generally has a coating. The better coating is to spray the whole surface of the tank with mortar. Normally, a rubber gasket is attached to the bottom. This is said to have two functions:
Anti-noise effect: The bottom of the water tank is sprayed or glued to the rubber sheet and does not fall off, which can reduce the sound of the faucet water from the impact of the pelvic floor, and play a buffering role to silence.
Anti-condensation effect: Although the water tank does not seep water, the outer wall of the water tank is prone to condensation of water vapor. The frozen food is placed in the sink, and the water vapor will condense the bottom of the basin to form water drops, which will make the interior of the cabinet wet. Spraying a suitable coating on the bottom of the sink may reduce or even eliminate the temperature difference and destroy the formation of water droplets. The high-quality coating also has a certain moisture absorption function to protect the cabinet from flooding;
However, most of the bottoms of the sinks on the market are ordinary paints, which do not absorb moisture, and the anti-exposure function is not large, just swaying. At the same time, many domestic commercial coatings on the sinks obscure the small crack pores and welding defects that occur in the stretching process of the water basin, which makes it difficult for us to identify the thick and thin, good and bad steel plates used by the people. This is often used to hide some problems.
2. The bottom of the sink has a silencer pad, and there is almost no sound when washing dishes.
3. Surface flatness: It is the most intuitive standard for checking the quality and grade of the sink. The line of sight is consistent with the plane of the sink. The edge of the sink should not protrude, and it will not warp. The error is less than 0.1mm. The flatness is not good, in addition to affecting the appearance, it is also easy to cause water seepage and scale. The surface of the high-quality sink is flat, soft and soft in appearance, not easy to stick to oil, easy to clean and wear-resistant. Remind everyone to buy a sink, you can touch the wall part of the pot by hand to see if there is no drum kit, a good sink will not have a drum kit.
information about handmade sink manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/