Handmade Sink Manufacturers Share How To Properly Install The Sink
handmade sink manufacturers share common problems with installing sinks:
1. Which master of the job can you find?
Generally, we can find the master of the stone. They often install a variety of stone countertops, gas stoves, sinks, etc., so they are very familiar with this operation, and according to their own situation, they will give suggestions for rationalization. If you want to change to an under counter basin in the later stage, you can take a photo of all aspects, so that after you find them, you can more intuitively reflect the problem.
2. First of all, the first question, can the installed sink be changed to the above counter basin?
It is ok. Generally, the opening of the upper basin is the hole of the trough, while the under counter basin is the hole of the edge. It is definitely bigger than the under counter basin, so it is definitely no problem.
3. Do you need to remove the countertop?
It is also possible to install without removing the countertop, but it depends on the level of the installer. For example, the installation method shown above, you can see that the quartz stone and screws are glued first, and then the marble glue is solidified, then the fasteners and nuts are placed, and the water tank is firmly clamped, especially Close to the wall, when the screw is on, the hand must not reach in. You can fix it with a wrench with an extension rod.
information about handmade sink manufacturers : https://www.afastainlesskb.com/product/sink/handmade-sink/