Emergency Light Manufacturers – Emergency Exit Light Requirements
Building contractors may complain about emergency lighting and safety regulations, but in an emergency, the name of the game is for export. Although local regulations may vary in language, the International Building Code (IBC) stipulates that “the export method is continuous and unobstructed travel from any occupied part of the building or structure to the vertical and horizontal exits of the public road. Path. The exit consists of three separate and distinct components: the exit passage, the exit and the exit.”
Section 1006.1 of the IBC further stipulates that all export methods, including export and export exports (if the exit does not enter the public area directly), must have emergency exit lights and should be properly illuminated at all times of the building. occupy. Some state and local regulations extend this to contract cleaners who include non-working hours. Emergency Light Manufacturers Describe Critical Conditions for Emergency Exit Lights
1. Appropriate exit route lighting:
Typically, the IBC requires illumination of the exit, exit and exit at an illumination level of no less than 1 foot of candle (11 lux) at the walking surface. There are exceptions to the theatre, but there are reasons for the strips that illuminate along the aisles and discreet candlesticks. The National Fire Protection Association (NFPA) has adopted IBC requirements for lighting and lighting levels. Some jurisdictions may have stricter standards. For specific requirements, please refer to local regulations
2. Power failure and emergency exit lights:
When the power is off, the emergency lighting system (including the exit light) must be switched to battery power within 10 seconds and must remain illuminated for 90 minutes. The 90-minute window not only gives passengers time to escape, but also helps firefighters and first-aiders. Reliable battery life can not only be the difference between life and death, but also reduce damage to your property.
3. Illuminated exit sign:
There are general rules for placing exit signs, but local firefighters have the final say. In the new building, it is very simple. In the transformation, especially in historical buildings, there may be some negotiation and compromise. A qualified emergency lighting contractor can advise and assist in selecting the type and location of the exit light.
The exit sign can be illuminated internally or externally under the IBC. The sign should always be lit and the same 90-minute battery requirements as other exit lighting methods.
Font size, font, kerning and lighting levels are also subject to strict standards. The goal is to identify those who may not have perfect vision in the smoky area to identify an exit sign. Everyone knows what it means to shine above the door.
What is not stated in the code is the type of illumination. With the improvement and expansion of technology, the choice of lighting is also expanding. For example, installing or upgrading a continuous illuminated exit sign to an LED light will result in significant savings over the life of the luminaire without sacrificing safety. Fewer lamp replacement also means less disruptive service calls or dragging out of the ladder and messing with the lampshade.
Working with experienced local emergency lighting providers and installers can save you time and money. Local lighting contractors are familiar with specifications and inspectors and can develop a solution that stays safe, meets the code, and works with your budget. The sooner you contact our project, the more security lighting will be included in your plan.