China Emergency Light Manufacturers – Fire Emergency Lighting Note: 8 Things
We should be familiar with the fire emergency light. It suddenly loses power, and the fire will automatically light up. This is the “help” light at the crucial moment. I want it to play its role, but many people should not study it carefully. The following are the fire emergency lights elaborated by the China Emergency Light Manufacturers , the use of emergency evacuation lights and precautions.
1. The emergency light has a plug and can be charged by plugging it into the socket.
2. Turn on the main power of the green light. When the light is off, it is full of red light. The emergency light is in the waiting state. Press the “Test” button on the panel, and the emergency light should be illuminated immediately.
3. When the power fails, the emergency light will automatically light up. Second, the use of precautions
1. When installing the emergency evacuation indicator, the user must read the instruction manual in detail, and then turn on the AC power supply to charge the LED fire emergency light;
2, AC voltage 220V can be connected to the power supply, the main power supply, the charging indicator light, press the “test” button, the main power, the charging indicator is off, and the light is always on emergency operation.
3, normal use, if a yellow fault light is found, it means that the bulb failure should be repaired in time.
4, the safety of the main light source should be controlled by a separate switch, not affected by ordinary lighting and other power control switches.
5, the lamp uses nickel-cadmium battery, there is fire emergency light at the factory, the battery is in a ventilated state, it is recommended to use the front lighting should be about 18 hours to activate the chemical inside the battery, extend the life lamp;
6, the lamp is maintenance-free; when the discharge time is less than 50% of the rated time, the emergency light should be replaced. Replace the battery model, polarity and capacity.
7. When installing and using the fire emergency evacuation lamp, the user must carry out safety grounding in accordance with the provisions of the ground sign.
8, replace the LED light source, should contact the manufacturer.